Section 4: Operations; Basic Controls - Grizzly H3140 Owner's Manual

SECTION 4: OPERATIONS

To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model H3140 (Mfd. Since 6/02)
manual BEFORE

Basic Controls

Use Figure 7 and the descriptions below to
become familiar with the basic controls of your
machine.
Sanding Belt Tracking/Tension Release Knob:
Turning the knob adjusts the belt tracking left and
right. Pushing the knob inward releases tension
from the sanding belt for easier belt removal.
ON/OFF Switch: Supplies power to the motor,
moving the sanding belt.
Table Lock Lever: Tightens to secure the table
and loosens to allow for repositioning of the table
for angle sanding.
Sanding Belt
Tracking/
Tension
Release Knob
Figure 7. Basic controls.
ON/OFF Switch
Table Tilt Lock Lever
-15-