Unpacking
This Knife Belt Sander/Buffer is shipped from the
manufacturer in two carefully packed cartons. If
you discover the machine is damaged after
you've signed for delivery, and the truck and dri-
ver are gone, you will need to file a freight claim
with the carrier. Save the containers and all pack-
ing materials for possible inspection by the carri-
er or its agent. Without the packing materials, fil-
ing a freight claim can be difficult. If you need
assistance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
Figure 2. Overview of parts.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
G1015 Knife Belt Sander/Buffer
Parts Inventory
Figure 2 displays all of the parts you should have
after you unpack the boxes. You should have the
following items:
• Motor Unit
• Hex Nut, Right Hand Thread
• Shoulder Nut, Left Hand Thread
• Wheel Flanges (2) -
• Wheel Flanges (2) -
• Round Spacer
• Mounting Bracket, Sanding Arm
• Pivot Arm Bracket, w/ Large Bushing
• Lower Pivot Arm
• Upper Sanding Arm Assembly
• Drive Wheel
• Sanding Belt Shoe
• Shoe Mounting Bracket
• Tool Rest Mounting Bracket Assembly
• Tool Rest
• Sanding Belt 100 Grit
The hardware needed to assemble this machine
has generally been fastened to the component
part. A complete listing of hardware and all detail
parts is included in the parts lists and diagrams
located at the back of this manual.
3
⁄
'' ID
4
5
⁄
'' ID
8
-8-