Southbridge Configuration - Fujitsu Siemens Computers D1711 Technical Manual

2 BIOS information
Search for MDA Resources [No]
Sets whether to allow search for MDA resources.
Configuration options: [No] [Yes]
VLink 8X Supported [Enabled]
Enables or Disables support for VLink, which is a VIA-dedicated bus. The data transfer rate
supports VLink 4X and VLink 8X.
Configuration options: [Disabled] [Enabled]
AGP Mode [AGP 8X]
This mainboard supports the AGP 8X interface that transfers video data at 2.12 GB/s. AGP 8X is
backward-compatible, so you can keep the default [AGP 4X] mode even if you are using an AGP 8X
video card. When set to [AGP 4X] mode, the AGP interface only provides a peak data throughput of
1.06 GB/s even if you are using an AGP 8X video card.
Configuration options: [AGP 8X] [AGP 4X] [AGP 2X] [AGP 1X]
i
The [AGP 8X] option appears only when you install an AGP 8X graphics card.
AGP Fast Write [Enabled]
Enables or disables the AGP Fast Write feature.
Configuration options: [Enabled] [Disabled]
Graphics Aperture Size [64MB]
Allows you to select the size of mapped memory for AGP graphic data.
Configuration options: [256MB] [128MB] [64MB] [32MB]
AGP 3.0 Calibration cycle [Disabled]
Enables or disables the AGP Calibration mechanism.
Configuration options: [Disabled] [Enabled]
DBI Output for AGP Trans [Disabled]
Enables or disables the DBI output for AGP Trans.
Configuration options: [Disabled] [Enabled]

SouthBridge Configuration

MPS Revision [1.4]
Sets the MPS revision value. Configuration options: [1.1] [1.4]
37
A26361-D1711-Z120-1-7619, Edition 1