Fujitsu Siemens Computers D1711 Technical Manual page 30

1 Product introduction
5. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V)
These connectors are for an ATX 12 V power supply. The plugs from the power supply are designed
to fit these connectors in only one orientation. Find the proper orientation and push down firmly until
the connectors fit completely.
In addition to the 20-pin ATXPWR connector, this mainboard requires that you connect the 4-pin
ATX +12 V power plug to provide sufficient power to the CPU.
● Do not forget to connect the 4-pin ATX +12 V power plug. Otherwise, the system
i
does not boot up.
● Make sure that your ATX 12 V power supply can provide 12 A on the +12 V lead and
at least 1 A on the +5-volt standby lead (+5 VSB). The system can become unstable
or will not boot up if the power is inadequate.
K8V-MX ATX Power Connectors
6. Front panel audio connector (10-1 pin FP_AUDIO)
This interface for the Intel® front panel audio cable allows convenient connection and control of
audio devices.
K8V-MX Front Panel Audio Connector
22
A26361-D1711-Z120-1-7619, Edition
1