Change Supervisor Password - Fujitsu Siemens Computers D1711 Technical Manual

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of
the screen shows the default Not Installed. After you have set a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press ! .
2. On the password box that appears, type a password composed of at least six letters and/or
numbers, then press ! .
3. Confirm the password when prompted.
The message Password Installed appears after you successfully set your password. The Supervisor
Password item now shows Installed. To change the supervisor password, follow the same steps as in
setting a user password.
To clear the supervisor password, select the Change Supervisor Password, then press ! . The
message Password Uninstalled appears.
After you set a supervisor password, the other items appear to allow you to change other security
settings.
User Access Level (Full Access]
Allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
No Access prevents user access to the Setup utility.
View Only allows access but does not allow change to any field.
allows change to only selected fields, such as Date and Time.
Limited
Full Access allows viewing and changing all the fields in the Setup utility.
A26361-D1711-Z120-1-7619, Edition 1
2 BIOS information
49