Fujitsu Siemens Computers D1711 Technical Manual page 43

Memory Configuration
Memclock Mode [Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or select
[Manual] to set using one of the standard values.
Configuration options: [Auto] [Limit]
Bank Interleaving [Disabled]
Sets whether to allow memory accesses to be spread out over BANKS on the same
node or across nodes, decreasing access contention.
Configuration options: [Auto] [Disabled]
CAS Latency (CL) [Auto]
Sets the CAS Latency. Configuration options: [Auto] [2.0] [3.0] [2.5]
TRCD [Auto]
Sets the TRCD. Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK]
[6 CLK]
TRAS [Auto]
Sets the TRAS. Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK]
[9 CLK] [10 CLK] [11 CLK] [12 CLK] [13 CLK] [14 CLK] [15 CLK]
TRP [Auto]
Sets the TRP. Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
AMD Cool & Quiet Configuration
Cool N' Quiet [Enabled]
Allows you to enable or disable the AMD K8 Cool'n'Quiet function.
Configuration options: [Enabled] [Disabled]
A26361-D1711-Z120-1-7619, Edition 1
2 BIOS information
35