Table of Contents
Advertisement
1 Product introduction
8. System panel connector (10-1 pin F_PANEL)
This connector accommodates several system front panel functions.
K8V-MX F_Panel Connector
System Power LED Lead (2- pin PLED)
This connector is for the system power LED. The LED lights up when you turn on the system power,
and blinks when the system is in sleep mode.
ATX Power Switch / Soft-Off Switch Lead (2-pin PWRSW)
This connector is for a switch that controls the system power. Pressing the power switch turns the
system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings.
Hard Disk Activity LED Lead (2- pin IDE_LED)
This connector supplies power to the hard disk activity LED. Any read or write activity of an IDE
device causes the LED to light up.
Reset Switch Lead (2-pin RESET)
This connector is for the case-mounted reset switch to reboot the system without turning off the
system power.
24
1
A26361-D1711-Z120-1-7619, Edition
Hide quick links:
Advertisement
Table of Contents
