Multi-Session Backup - Aleratec DVD/CD Flash Copy Tower User Manual

Using the DVD/CD Flash Copy Tower
Note: Keep disc type consistent when using Disc Spanning. For example,
if you place a CD-R as the first disc for copying, do not place a DVD-R or
DVD+R to continue copying. The DVD/CD Flash Copy Tower will show an
error message and ask for another blank CD-R.
Note: Disc Spanning will automatically detect the next blank disc and
eject the completed first disc.

Multi-Session Backup

The DVD/CD Flash Copy Tower can combine several small size Memory Cards
and USB flash drives together into a disc. For example, you can put an SD Card,
Memory stick, Memory stick pro, USB, MP3(USB), and handy drives, etc. with
total content size smaller than a CD disc size (see Setup → Advanced Setup →
DVD/CD Spare Size on page 24 of this User Guide for setting writable space on
DVD/CD) together. The DVD/CD Flash Copy Tower will execute close session after
every copying session, and keep this disc open for next time copying as long as the
disc's remaining size is enough.
1. Insert a Memory Card (e.g. USB flash drive) and place a DVD or CD into the
burner.
2. Select 1. Copy, → Select 1. USB to Disc → Press OK → The DVD/CD Flash
Copy Tower will begin copying.
Total = 64
Waiting disc...
Write Disc
16%
3. When finished, the disc tray will eject, and you can continue to copy another
Memory Card or USB, or you can take out the disc and keep it for other copying
sessions.
Note: Multi-Session Backup does not support disc spanning.
Note: The DVD/CD Flash Copy Tower can use blank disc to start
Multi-Session function; if the disc has data inside, the DVD/CD Flash
Copy Tower can't execute Multi-Session function. Therefore, if you
like to use CD-RW or DVD RW to backup, please make sure you have
erased the original data of the disc.
Number of files to be copied
Total file size to be copied
137M
20M
Copying progress
www.aleratec.com
13