Watch Set; Programming The Time Of Day; Programming The Date - Polar Electro E200 User Manual

7. Using either button on the right will alter the value of this
number. Lock in your choice by pressing the red button.
8. Now you can return to the Time of Day by holding down the
blue button, or you can press the upper right button once to
set Timer 2. This timer is set in exactly the same way as Timer 1.
When you have set Timer 2, press and hold the blue button to
return to the Time of Day.
Note: If Timer 1 is set to OFF, Timer 2 will not be displayed.

Watch Set

The Watch Set loop is accessed from the Options mode.
You can use it to set the correct time of day and date.

Programming the Time of Day

1. From Time of Day display, press the upper right button two
times. Your display will read, "OPTIONS".
2. Press the red button once and the upper right button once.
Your screen will read, "WATCH SET".
3. Enter this mode by pressing the red button two times. "TIME"
will be displayed on the top row. The middle line will show the
default time of day and the number 12 or 24 will be flashing
on the lower line. Your HRM comes preset for the standard
U.S. 12 hour time clock. By pressing either button on the right
side you can switch it to a twenty four hour (i.e., military time)
clock. Whichever setting you select, press the red button one
time to lock in your selection. If you have picked the 12 hour
time clock, the am (or pm) will begin to flash.
4. By pressing either button on the right side, you can pick
whichever is appropriate.
5. Press the red button once to lock in your choice and the
hours will begin to flash.
6. Using either button on the right will alter the value of this
number. Lock in your choice by pressing the red button.
The minutes will begin to flash.
7. Using either button on the right will alter the value of this
number. Lock in your choice by pressing the red button.
16
E200 man USA C.pm6 16-17
8. Now you can return to the Time of Day by holding down the
blue button, or you can press the upper right button to set the
date. If you decide to set the date now, begin with step 4 below.

Programming the Date

1. From Time of Day display, press the upper right button two
times. Your display will read, "OPTIONS".
2. Press the red button once and the upper right button once.
Your screen will read, "WATCH SET".
3. Press the red button once and the upper right button once.
"DATE" will be on the top line and the lower line will show
the month, day and year in numeric form.
4. Press the red button once and the month number will begin
to flash.
5. Pressing either button on the right side will alter the month.
Lock in your choice by pressing the red button. The day
number will begin to flash.
6. Pressing either button on the right side will alter the day. Lock
in your choice by pressing the red button. The year number
will begin to flash.
7. Pressing either button on the right side will alter the year.
Lock in your choice by pressing the red button.
8. Press and hold the blue button to return to the Time of Day.
Note: If you have chosen to keep time by using the 24 hour
clock, the date will be presented in a different order. The order
will now be day, month, year. Regardless of order, you can set
the date by the directions above.
18/11/02, 12:56
17