Use External Media; Connect The Printer To Power - Intermec PC23d User Manual

Chapter 2 — Set Up the Printer

Use External Media

Connect the Printer to Power

54
To use large rolls of media or tag stock, place the media behind the
printer, and feed the media into the printer through the external media
feed slot.
Be sure you thread the media through the media holders or media
guides as you would for media installed inside the printer.
Use only the AC power adapter supplied with the printer. The use
of a power adapter not approved by Intermec voids the product
warranty and may damage the printer.
1 Connect the power adapter to the power port on the rear of the
printer.
2 Connect the power adapter to AC power. When the adapter is
connected to AC power, the green LED in the adapter connector
turns on and stays on.
PC23 and PC43 Desktop Printer User Manual