Ptz Settings; Preset Tour; Ptz Screen Options - GE Security TruVision DVR 10 User Manual

Chapter 5: Advanced setup

PTZ settings

Use the PTZ screen, shown as Figure 30 below, to define PTZ functions for cameras
connected to your TVR 10. An RS-485 port is available at the TVR 10 back panel for
PTZ control. You can define RS-485 settings to match your PTZ protocol such as:
• PTZ parameters (including baud rate, data bits, stop bits, parity, and flow control)
• PTZ protocol
• PTZ address
• Preset parameters

• Preset tour

• Shadow tour
To display the PTZ screen, click PTZ on the main menu.
Figure 30: PTZ screen

PTZ screen options

Table 21 below describes the PTZ screen options.
Table 21: PTZ screen options
Option
Select camera
PTZ parameters
PTZ address
76
Description
Selects a PTZ camera.
Parameters include: baud rate, data bit, stop bit, parity, and flow
control. These parameters must be the same as the PTZ protocols.
Specifies the PTZ address. Each PTZ has a different address.
TruVision DVR 10 User Manual