GE Security TruVision DVR 10 User Manual page 52

Chapter 5: Advanced setup
2. Select a camera from the Camera box.
3. Enter the new camera name in the Camera Name edit box.
Click the Camera Name edit box to enter the edit mode. You can enter numerals,
uppercase and lowercase letters (see "Using an edit box" on page 22 for more
information). The camera name can support 32 characters. Press ENTER to exit
the edit mode.
4. Click Confirm to save your changes. Click Cancel or press ESC to abort.
Camera name position
You can position the camera name anywhere on screen. If you do not want to display
the camera name, clear the check box next to the Camera Name edit box. You can
copy the position settings to any other camera.
To edit a camera's position:
1. Click Camera on the main menu to display the Camera Configuration screen.
2. Select a camera from the Camera box.
3. Enter the Camera Name Position Setup interface.
Check the check box on the right side of the camera name, then click Position to
enter the Camera Name Position Setup screen.
4. Position the camera name.
The interface displays a grid with the camera name in the bottom right corner.
Drag the camera name or use the directional arrow buttons (Up, Down, Left, or
Right) to move the camera name position. When satisfied with the on-screen
position, press ENTER to return the Camera Configuration screen.
5. Click Confirm to save the camera position.
On-screen date and time position
In addition to the camera name, the TVR 10 also displays the system date and time
on screen. You can modify the on-screen display position (also referred to as OSD) of
the system date and time on the Camera Configuration screen.
To position the camera name on screen:
1. Display the Camera Configuration screen and select a camera.
2. Select a display mode for the camera from the Date & Time OSD list box. Display
modes include:
• Solid black
48 TruVision DVR 10 User Manual