GE Security TruVision DVR 10 User Manual page 81

Option
PTZ type
Preset setup
Preset tour setup
Shadow tour setup
PTZ types
For a list of support PTZ types, see Appendix D "PTZ protocols" on page 101.
Configuring the PTZ protocols for GE Security cameras
Before the PTZ cameras are assembled in their housings, set their protocol and
address DIP switches for the TVR 10. for the different GE Security's PTZ camera
configurations. See Table 22 below for different GE Security PTZ camera settings.
If you are using PTZ cameras from another company, please refer to their
configuration instructions.
Table 22: Configuring GE Security PTZ cameras
Camera Switch setting
TruVision Dome Protocol switches
16 PTZ
Address switches
Baud rate
Cyberdome Protocol switches
TruVision DVR 10 User Manual
Description
Specifies the PTZ protocols. See Appendix D "PTZ protocols" on page
101 for a list of PTZ types.
Note: If you select the Pelco-P protocol, define the PTZ address plus or
minus 1 the Camera ID. For example, if the camera ID is 2, the TVR 10
PTZ address should be set as 3.
Displays the Preset Setup screen.
Displays the Preset Tour Setup screen.
Displays the Shadow Tour Setup screen.
1011
0000
0000
Auto
Protocol switches
Chapter 5: Advanced setup
Address
switches
Baud
switches
77