GE Security TruVision DVR 10 User Manual page 35

Figure 13: Manual Record screen
The controls and options available on the Manual Record screen are described in
Table 10 below.
Table 11: Manual Record controls and options
Option Description
Camera Lists the number of cameras the TVR 10 has.
Status Camera work status has four values:
•
•
•
•
Start/Stop The checkmark indicates you can start recording on the corresponding channel .
The X mark means you can stop recording.
Start All Starts recording on all channels.
Stop All Stops recording on all channels.
Manually starting or stopping a recording
This section describes how to manually start or stop a recording.
To manually start or stop a recording:
1. Right-click and then click Manual Record to display the Manual Record screen.
Alternatively, press the REC button on the front panel or remote control.
2. Enter your user name and password if requested.
TruVision DVR 10 User Manual
Gray indicates the camera is idle.
Green indicates the channel is recording (including real time recording,
alarm recording, motion detection recording).
Red indicates network transmission.
Orange indicates both recording and network transmission.
Chapter 4: Basic operation
31