Selecting A Camera; Calling Up A Preset Ptz Position - GE Security TruVision DVR 10 User Manual

Figure 12: PTZ control interface

Selecting a camera

When in PTZ control mode, press the numeric buttons to select a camera. For
example, press the number 2 button to select the second camera PTZ.
After selecting the camera PTZ, you can use the control buttons to control the PTZ.
PTZ control buttons description
Table 10 below provides descriptions of the PTZ control buttons.
Table 10: PTZ control buttons description
Button
Up, Down, Left, Right Arrow
buttons
ZOOM+, ZOOM-
FOCUS+, FOCUS-
IRIS+, IRIS-
REC/SHOT
PLAY/AUTO

Calling up a preset PTZ position

There are several ways to call up a preset position.
TruVision DVR 10 User Manual
Description
Pans left and right. Tilts up and down.
Zooms in and out.
Focuses in and out.
Opens and closes the iris controls.
Calls up a preset position. This feature is camera and protocol-
specific.
Calls up auto panning.
Chapter 4: Basic operation
29