BESAFE iZi Kid ISOfix User Manual page 9

4
7
5
Click
6
7
13
Pull both ISOfix connectors (7)
as far out as possible.
4
The switch (4) then goes into
the lowest position and locks
the connectors (7).
7
Click the ISOfix connectors in
the ISOfix anchorages.
Make sure that the two indica-
tors (10) are green, both in the
hole and on the inside of the
release gear.
10
Adjust the floor support (12)
so that it is in contact with the
floor of the vehicle.
Lock the floor support with the
12
lockingbolt (13).
9