BESAFE iZi Kid ISOfix User Manual page 5

Height adjustment of harness system
Position of the shoulder strap:
a
Check that the shoulder strap slots are
levelled with your child's shoulders.
Pull out the shoulder belts while pressing the
b
button on the harness adjustment mechanism.
Height can be adjusted by releasing
c
the height adjustment device on the back of
the iZi Kid ISOfix, place it in the correct position
and clicking it in. Twist and pull the shoulder
belts on the front side of the seat until the belts
are adjusted into the correct position. Check
the webbing has not become twisted.
d
Tighten the belts by pulling them towards
you and in this way straighten them out
inside the construction.
e
Lay the shoulder straps over the sides of the iZi
Kid ISOfix, before your child is seated. Then place
the straps over the shoulders of your child and
close the buckle; Click!
Position the pads on the shoulder straps over the
f
child's shoulders. Place one hand on the front of
the car seat and pull the harness adjustment strap
towards you. Continue pulling until the harness is
a comfortable but firm fit.
!
You must adjust the shoulder belt of the harness to the
correct position for your child before installing the seat, as it
cannot be adjusted in the car. The harness must be fastened
and adjusted correctly at all times. Children should be
encouraged to remain within the harness system.
Too high
Too low
5
Correct
Click!