Samsung SCB-6000 User Manual page 31

• COMM ADJ (Communication Adjustment) :
This function sets up the camera
communication status when controlling the
camera through an external control device.
1) When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the
arrow indicates <COMM ADJ>.
2) Set up the mode using the Function Setup
switch.
- PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T, SAMSUNG-E,
Pelco-D, Pelco-P, Bosch, Honeywell, Vicon, Panasonic, GE, AD)
- CAM ID : Determines the camera's identification number (between 0 and 255).
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- DISP ID : Display camera title on top left corner of the screen.
- RETURN DATA : Specify whether to return the same command to the controlling device
when a control command is delivered to the camera.
• LANGUAGE : You can select the menu language according to your requirements.
• RESET : Resets the camera settings to the factory defaults. Communication,
Language, Video Format and Monitor settings are not initialized.
• RETURN : Select this to save the SPECIAL menu settings and return to the MAIN
SETUP menu.
EXIT
Save the current settings and exit the MAIN SETUP menu.
COMM SETUP
► 1. PROTOCOL
.... .... .... ....
2. CAM ID
*
3. BAUD RATE
4. UART MODE
5. DISP ID
6. RET PKT
7. RETURN
English _31
SAMSUNG-T
1
9600
8-N-1
OFF
ENABLE