Samsung SCB-6000 User Manual page 11

Rear Side
Item
HD-SDI Video Out
terminal
Power LED
C-VIDEO
SETUP Switch
HD-SDI
POWER
C-Video
1 2 3 4 5
1 : GND 4 : RS-485+
2 : EXT_D/N 5 : RS-485-
DC 12V
3 : MD_OUT
AC 24V
BNC terminal for HD-SDI video signal output.
This lamp turns green when the proper power is applied to the camera.
Analogue video output terminal of C-Video.
Use a monitor cable for testing the camera with a portable display.
(for installation)
The switch is used for setting and adjusting the camera's functions and
properties.
Press and hold this switch more than 2 seconds to display the main menu
on the screen.
Move this switch left or right to move the cursor or change
◄/►
the value in the menu.
Move this switch up or down to move the cursor in the
▲/▼
menu.
Press the switch to set the function in menu. To move to a sub-

menu item in the menu, press this switch.
GND
Description
English _11