Samsung SCB-6000 User Manual page 21

EXPOSURE
1. When the SETUP menu screen is displayed,
select <EXPOSURE> by using the Function
Setup switch so that the arrow indicates
<EXPOSURE> .
2. Select a desired mode using the Function
Setup switch.
• BRIGHTNESS : Adjust the screen brightness.
• SHUTTER : You can select the shutter.
- – – – : 1/30sec
- A.FLK : Select this when you experience
picture flicker, this happen when there is a
clash with the installed lighting frequency.
- ESC : Select this to control the shutter speed
automatically. If ESC is selected, the shutter
speed is automatically controlled depending on
the ambient illumination of the subject.
- MANUAL : You can control shutter speed manually (1/30sec ~ 1/12,000sec)

J When you use a DC lens, set the shutter mode to --- if color rolling occurs.

Carefully position the camera when installing, since produced image quality might be poor if
framing a bright light source while the shutter mode of EXPOSURE is set to AUTO.

When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
MAIN SETUP
1. LENS
► 2. EXPOSURE
3. WHITE BAL
4. SSDR
5. BACKLIGHT
6. SSNR3
7. DAY/NIGHT
8. SPECIAL
9. EXIT
EXPOSURE SETUP
* .... .... .... ....
1. BRIGHTNESS
► 2. SHUTTER
3. AGC
4. SENS-UP
5. RETURN
English _21
DC
ATW
ON
OFF
ON
AUTO
50
A.FLK
HIGH
ON