Pci Expansion Card Installation / Removal; Install The Expansion Card - Acer AR320 F2 Service Manual

PCI Expansion Card Installation / Removal

Acer AR320 F2 has one bus slots with of two separate bus segments:
 PCI16X - PCI-E x16 slot

Install the expansion card

1. Lift the riser bracket slightly, then pull it out from the server chassis.
2. Insert the card into the selected slot and secure the expansion card with screw.
Make sure that the card is properly seated.
NOTE: Do not discard the slot cover. If the expansion card is removed in the future, the slot cover must be
reinstalled to maintain proper system cooling.
NOTE: Remove the expansion card from its protective packaging, handling it by the edges.
3. Attach the expansion slot card on the riser bracket and secure it with screws
4. Insert the card into the selected slot. Make sure that the card is properly seated..
5. Connect the necessary cables to the expansion card as required
34