2.1
Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed or have a packed
chassis, you may need to partially remove the card to make all the connections.
2.2
USB Ports (LAN1_USB12/LAN2_USB34/USB56)
The AIMB-214 provides up to six USB ports. The USB interface complies with USB
Specification Rev. 2.0 supporting transmission rate up to 480 Mbps and is fuse pro-
tected. The USB interface can be disabled in the system BIOS setup.
The AIMB-214 is equipped with two high-performance 1000 Mbps Ethernet LAN
adapters, both of which are supported by all major network operating systems. The
RJ-45 jacks on the rear panel provide for convenient LAN connection.
Table 2.1: LAN LED Indicator
LAN Mode
1 Gbps Link on
100 Mbps Link on
Active
AIMB-214 User Manual
Lan Indicator
LED1 Green on
LED1 Orange on
LED2 Green flash
14
LAN2_USB34 LAN1_USB12
LAN1_USB12
LAN2_USB34
USB56