Advanced Pci/Pnp Setting - Advantech AKMB-G41M User Manual


Resume on PCIE WAKE#
Disable/Enable PCIE wake event.

Resume On RTC Alarm
Disable/Enable RTC wake event.

High Performance Event Timer
Disable/Enable High Performance event.

Restore on AC power Loss
Use this to set up the system response after a power failure. The "Off" setting
keeps the system powered off after power failure, the "On" setting boots up the
system after failure, and the "Last State" returns the system to the status just
before power failure.
3.2.10

Advanced PCI/PnP Setting

Select the PCI/PnP tab from the AKMB-G41M setup screen to enter the Plug and
Play BIOS Setup screen. You can display a Plug and Play BIOS Setup option by
highlighting it using the <Arrow> keys. All Plug and Play BIOS Setup options are
described in this section. The Plug and Play BIOS Setup screen is shown below.

Clear NVRAM
Set this value to force the BIOS to clear the Non-Volatile Random Access Mem-
ory (NVRAM).The Optimal and Fail-Safe default setting is No.

Plug & Play O/S
When set to No, BIOS configures all the devices in the system. When set to Yes
and if you install a Plug and Play operating system, the OS configures all Plug
and Play devices not required for bootup.

PCI Latency Timer
Value in units of PCI clocks for PCI device latency timer register.

PCI IDE BusMaster
Increase the HDD write/read speed when enable.
31 AKMB-G41M User Manual