Jumpers And Connectors; Table 1.1: Connectors - Advantech AKMB-G41M User Manual

1.4

Jumpers and Connectors

Connectors on the AKMB-G41M motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers used to
configure your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.

Table 1.1: Connectors

Label
JFP1
JFP2
JFP3
USB56
USB78
VGA1
IDE1
COM1/COM2
COM3 ~ COM6
KBMS1
CPU_FAN1
SYS_FAN1
SYS_FAN2
LAN1_USB12
USB34
SATA 1 ~ 4
ATX12V1
EATXPWR1
AUDIO1
FPAUDIO1
SPDIF OUT
USB PW
kBPWR
AKMB-G41M User Manual
Function
Power Switch / Reset connector
External speaker / SATA HDD LED connector / SM Bus connector
Power LED
USB port 5, 6 (on board)
USB port 7 8(on board)
VGA connector
Primary IDE connector (Blue)
Serial port: COM1/COM2 (9-pin connector)
Serial port: CRS-232 (9 pin header)
PS/2 keyboard and Mouse connector (on board)
CPU FAN connector
System FAN connector 1
System FAN connector 2
LAN1/USB port 1, 2
USB port 3, 4
Serial ATA connector
ATX 12 V Auxiliary power connector
ATX power connector
Line Out, Mic IN connector
Front Panel audio connector (FP_AU- DIO)
Digital Audio connector
USB 5 V / 5 Vsb power switch
Keyboard 5V/5Vsb power switch
4