Flywheel Adjustment - Ironman Fitness M-CT Owner's Manual

Flywheel Adjustment

Step 1 (Figure 1)
Figure 1
Use a 19mm wrench to turn the Flange Nuts on each
side of the Flywheel counter-clockwise until they are
loose from frame.
Step 2 (Figure 2)
Remove the plastic plug from the right frame fork.
Figure 2
Step 3 (Figure 3)
If Allen Bolt A is recessed more than Allen Bolt B, use
an allen wrench to turn Allen Bolt B counter-clockwise
a half turn until you find the flywheel center balanced.
If Allen Bolt A is longer than Allen Bolt B, turn Allen
Bolt B clockwise a half turn until you find the flywheel
center balanced.
Figure 3
Step 4
Reinsert the Plastic Plug into the right frame fork. Turn
the 2 flanged nuts clockwise to secure the flywheel back
in place.
12