Hardware Installation - PROLiNK Hurricane 9000P User Manual

Section Two: Connect the Modem/Router

2.3 Hardware Installation

The following steps instruct you to install the Hurricane 9000P for
One computer. For more than one computer, please refer to 2.4
Network Connection.
1. Plug the end of the Ethernet cable into the LAN Jack of the Hurricane
9000P.
2. Plug the other end of the Ethernet cable into your computer's RJ45
Jack of Ethernet card.
3. Connect the Power adaptor to the Power Connector.
4. Plug the telephone cable into the Line Jack .
5. Plug the other end of the telephone cable into
i) a Main Socket .
ii) OR the Jack of the two-way Microfilter labeled DSL.
Telephone
2-way
Microfilter
Main Socket ADSL Line
RJ-45
OR USB cable
(Optional)
Power Adaptor ......
Computer
8