Section Three: Configure The Pcs; Configure Your Pc - PROLiNK Hurricane 9000P User Manual

Section Three - Configure the PCs

3.1 Configure your PC.

The instructions in this section will help you to configure each
computer to communicate with the Router.
To do this, you need to configure your PC's network settings to
obtain an IP address automatically from the DHCP of the router.
Computers use IP addresses to communicate with each other
across a network, such as the Internet.
1. Go to the Network screen by clicking the Start button. Click
Settings and then Control Panel. From there, double-click the
Network icon.
2. On the Configuration tab, select the TCP/IP line for the
applicable Ethernet adapter. Then, click the Properties button.
3. Click the IP Address
tab. Select Obtain an IP
address automatically.
4. Click the Gateway tab,
and verify that the
Installed Gateway field
is blank. Click the OK
button.
5. Click the OK button
again. Click the Yes
button to restart your
computer.
Section There: Configure the PCs
1 0