Section Five: Usb Driver Installation - PROLiNK Hurricane 9000P User Manual

Section Five: USB Driver Installtion
5. USB Driver Installation
(Optional ,for using USB interface )
If there is no LAN card on your computer, you can use USB cable to
connect it to your computer.
1. Connect the USB cable from the Hurricane 9000P to the USB port of
your computer.
2. Windows (98/ME/2k/XP) will automatically detect " USB Device"
message under Add New Hardware Wizard menu, click "Next".
3. Select "Search for the best driver for your device.", click "Next".
4. Direct to drive where you have inserted the USB driver install disk,
click "Next".
5. Seach to "Prolink 9000 USB Network Interface", click "Next".
6. Seach to "Prolink 9000 USB Network adapter", click Next.
7. Click "Finish" and restart your computer.
8. open Internet Brower (e.g. Internet explorer) and type 10.0.0.2 then
refer to page 13 to configure the Hurricane 9000P.
2 5