Grizzly H5570 Instruction Manual page 5

Commentary
We are proud to offer the Grizzly Model
H5570 18 Gauge Finish Angle Nailer. This
model is part of a growing Grizzly family of
fine power tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation and proof of Grizzly's commit-
ment to customer satisfaction.
We are pleased to provide this manual with
the Model H5570. It was written to encour-
age safety considerations and guide you
through general operating procedures and
maintenance. This manual represents our
effort to produce the best documentation
possible.
The specifications, details, and pho-
tographs in this manual represent the
Model H5570 as supplied when the manu-
al was prepared. However, owing to
Grizzly's policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly. If
you have any comments regarding this
manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C / Technical Documentation
O
P.O. Box 2069
Bellingham, WA 98227-2069
-4
-
INTRODUCTION
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
Read the manual before assembly
and operation. Become familiar with
this tool, its safety instructions, and
its operation before beginning any
work. Serious personal injury may
result if safety or operational infor-
mation is not understood or followed.
H5570 18 Gauge Finish Angle Nailer