Index - EnGenius EP801 User Manual

Re: Default PIN is "0000".
Press "6" to set Auto Hang Up:
f.
Use CHANGE (Left) soft key to select and confirm on or off. The
(1)
Default PIN is "0000".
Re: When setting "on", the EP801 will automatically hang up if the far
end caller hung up already. However, this function depends on if
there is "Line Reversal" signal sent out by PBX or PSTN, after the
call hung up.
g. Press "7" to Set Time to support DTMF Caller ID:
Use CHANGE (Left) soft key to select and confirm on or off. The
(1)
Default PIN is "0000".
Re: When setting "on", the EP801 will automatically hang up if the far
end caller hung up already. However, this function depends on if
there is "Line Reversal" signal sent out by PBX or PSTN, after the
call hung up.
8. Press "7" to register, de-register handset and set Multi-Base: see Handset
Registration operation on Page 34, and Multi-base Setting on Page 46.
9. Press "8" to set Menu Display:
To avoid mis-setup of Call Settings (MENU-4), Phone Settings (MENU-5)
and Base Settings (MENU-6), you can hide these menus, so that other
handset users won't have chance to mis-settup these settings.
Re: When entering the Menu Display, you have to enter password first.
a. Press "1" to set hiding/un-hiding of the Call Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
b. Press "2" to set hiding/un-hiding of the Phone Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
c. Press "3" to set hiding/un-hiding of the Base Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
d. Press "4" to set hiding/un-hiding of the Multi-base Settings menu.
Use CHANGE (Left) soft key to select and confirm on or off.
(1)
Re: Select "On" means the menu will be displayed on screen. Select "Off"
means the menu will be hidden.
~53~

Index

2
2-Way/Intercom, 11, 19, 27, 28
A
Adjusting Receiver (Earpiece) Voice Volume, 11, 32
Adjusting Handset Speakerphone Voice Volume, 32
Adjusting Base Speakerphone Voice Volume, 32
Area Code, 16, 45, 51
B
Base ID, 29,47
Base Illustration, 17
Base Operation, 24
Base PIN, 15, 16
Base Ringer Setting, 46
Base Speed Dial, 45
Base Station, 5, 6, 7, 8, 11, 12, 18, 22, 23, 24, 27, 29, 35, 42
Base Station Features, 18
Base Station Installation, 22
Battery, 5, 6, 8, 13, 20, 21, 22, 23, 24, 34
Battery Recharge and Replacement, 34
Battery Safety Instructions, 6
Battery Strength, 10
Broadcast, 11, 14, 18, 19, 24, 28, 29, 30, 49
Broadcasting a Group of Handsets, 28, 29
Broadcasting all Handsets, 28, 29
Broadcasting an Individual Handset, 28, 29
BS Selection, 49
C
Call Barring, 13, 14, 41, 42, 49
Call Log, 12, 13, 44, 45
Call Timer, 14
Call Transfer, 37
Call Hold, 13
Caller ID, 12, 13, 16, 30, 31, 44, 45, 48, 52, 53
Call in-progress, 10, 34
Call Manager, 47, 48, 51
Call Settings, 14, 36, 47, 48, 50, 53
Call Waiting, 11, 19, 52
Call Waiting with Caller ID, 12, 52
Cardiac Pacemaker, 4
~54~