Charger Illustration - EnGenius EP801 User Manual

speed dial memory during the talking.
c.
HOLD ( ): press the key to put the call on hold.
d. FLASH (
): press the key to send a Flash signal to phone line to
retrieve a dial tone after the call ends, or to perform the call waiting
feature provided by local phone companies during a call.
e. REDIAL/P (
): press the key to retrieve the last dialed number.
Or store a pause time (1 second) while storing the speed dial
memory.
9. VOLUME keys (
and
a. Increase or decrease the ringer volume during standby mode.
b. Increase or decrease the voice volume during talk mode.
10. SPEAKERPHONE key (
)
a. Press the key to get the dial tone, followed by phone number to
make outgoing call.
b. Press the key again to hang up the call.
c. When enable the speakerphone, the backlight of the key will be
turned on too.
11. INTERCOM/BROADCAST Key (
a. Enter handset ID then press the key to enable the 2-way intercom
feature.
b. Enter handset ID then press and hold the key for over one second to
enable the broadcast feature.
Re: Press the INTERCOM/BROADCAST Key without entering handset
ID first, all registered handset will be enabled.
12. DC In: to plug in the power adaptor
)
)
~19~

Charger Illustration

DC in
Spare battery
charging slot
Spare battery
charging indicator
Handset
charging slot
~20~