EnGenius EP801 User Manual page 7

16-character names, and Date/Time stamp), needs Caller ID service
from local telephone company.
c. Phone numbers and names can be saved into phonebook while in
display.
8. Call barring
a. Block the users from dialing the long distance calls or international
calls.
b. Up to 5 digits of each call barring setting; up to 5 entries allowed.
c. If you need to dial a specific number to retrieve the dial tone, you
need to key in that number while setting the call barring.
[Note] You need to key in the accurate user ID and password to perform
this feature. The default password is "0000".
9. Any Key Answer (except
10. Key-guard
a. When the keyguard is selected, all keys will be locked.
Press UNLOCK (Left) soft key followed by "＊" to release it.
11. Dialing Prefix
a. Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
a. Places call on hold
13. Mute
a. Press MUTE (Left) soft key during talk, the handset microphone will
be muted.
Press UNMUTE (Left) soft key to release it.
14. Phonebook
a. 50 entries, each stores a phone number or handset ID (up to 26
digits) and name (up to16 characters)
b. Alphabetically sorted display and search by letter.
c. Dial from display.
d. During the stand-by mode, you can enter the phone book by
pressing or scrolling key.
15. Key tone
a. Four-level key tone volume selections (Off/Low/Medium/High).
and SILENT Soft Key)
~13~
b. Four key tone type selections.
16. Call Timers
a. Display call time duration for current call during and immediately
after the call.
17. Programmable Feature Call
a. Allow user to pre-program the most frequently used Feature code
into EP801 which is adjunct to the PBX system.
b. Up to 10 entries can be saved.
c. Once the feature code being programmed, you can quick perform
those functions during the call by pressing
18. PA On/Off
a. Enable or disable the broadcast function.
b. When PA is Off, the handset can't receive broadcast from base or
other registered handsets; But it can broadcast to base or other
registered handsets.
19. Menu Display
a. To avoid mis-setup in the "Call Settings"(MENU-4), "Phone Settings"
(MENU-5), "Base Settings" (MENU-6) and Multi-base Setting
(MENU-7-3), these settings can be hidden.
b. Password is required before enter Menu Display (MENU-8), the
default handset password is "0000".
c. When enable the settings, these setting will not displayed any
longer, unless disable them by entering Menu Display again.
20. Group Setting
a. Allow handset to subscribe to one or several groups.
Re: Up to 9 groups can be subscribed.
21. Custom Name
a. Allow changing the "EP801" screen to the desired wording or info,
such as the user's name.
Re: Up to 32 characters can be entered.
22. Change Pwd
a. Allow changing the handset password which requires to enter in Call
Barring (MENU-4-3) and Menu Display (MENU-8) .
Re:Default is "0000".
23. Change PIN
OPTION soft key.
~14~