Assembly Of The Remote Cable - Scott Spark Owner's Manual

ROLL FORK

ASSEMBLY OF THE REMOTE CABLE

SRAM/ROCKSHOX FORKS:
IMPORTANT:
C B
Please make sure the lockout of SRAM/RockShox fork is activated after transport
correctly. Therefore please compress fork 5-10 times before following the manual on
remote cable installation and adjustment.
ROCK SHOX ROLL FORK
The lever should show on the downside of the able roll follow indication:
See Detail A
ETAIL B
ALE 2:1
To assemble the cable please bring the lever into the All Travel Mode, push the cable
D into the lever-eyelet as shown on drawing below, push it through the pre-cut cable C
housing and fix it at the assembly unit on top of the right side of the fork crown.
Adress
SCOTT SPORTS SA
Route du Crochet 17
1762 Givisiez
SWITZERLAND
Fork cable
FORK CABLE
Division
ary to SCOTT SPORTS SA.
ission of SCOTT SPORTS SA is prohibited.
D
DETAIL A
SCALE 2:1
ROCK SHOX
Project
FORK
TWINLOC
Adress Part name Fix the cable with the 2mm allen screw on the barrel adjuster on the fork crown with a Weight
-
ROLL-FORKS
SCOTT SPORTS SA SCALE 13:10
tightening torque of 0.9Nm/ 8lb/in, cut the cable and secure it with a cable end-cap.
Route du Crochet 17
Scale
1762 Givisiez
SWITZERLAND 1:1
Version: 01
Please refer for this action also to the manual of SRAM/RockShox attached to the bike.
Division Pro-E file Drawn by
Adress Part name
BIKE cable-adapter.prt ROCK SHOX VL
SCOTT SPORTS SA
CABLE ASSEMBLY
Route du Crochet 17
C B
1762 Givisiez
SWITZERLAND
Version: 00
ion and data contained in this document is confidential and Division Pro-E file
ary to SCOTT SPORTS SA.
BIKE twinloc-rocks-cable-ass.asm
, using or disclosing such information and data without written
on of SCOTT SPORTS SA is prohibited.
D C
2mm allen
12
BIKE OWNERS MANUAL
ROCK SHOX ROLL FORK
A
SEE DETAIL
4
3
Detail A
DETAIL A
SEE DETAIL A
SCALE 2:1
Project
B A
TWINLOC
Part name Weight General tol.
-
ROLL-FORKS
3
Scale Material
1:1
Version: 01
Pro-E file Drawn by Date
2
BIKE cable-adapter.prt VL 03/06/09
C B
2
General tol. Format
- A3
1
Material Projection
- Project
TWINLOC
Date Page
Weight General tol. Format
03/06/09 1 / 1
*** g *** A4
1
A
Scale Material Projection
13:10 ***
Drawn by Date Page
VL 10/06/2009 1 / 1
B A
4
FOX-DT SWISS FORKS
F
Please make sure the lockout of FOX/DT fork is activated after transport correctly.
Therefore please compress fork 5-10 times before following the manual on remote
cable installation and adjustment.
4
3
The lever should show on the downside of the cable roll follow indication:
A
3
2
SEE DETAIL
To assemble the cable please bring the lever into the Full (Travel) Mode
Format
2
- A3 1
Projection
-
Page
1 / 1
A
push the pre-cut cable through the pre-cut cable housing into the lever as shown on
1
drawing below
Information and data contained in this document is confidential and proprietary to SCOTT SPORTS SA.
Copying, using or disclosing such information and data without written permission of SCOTT SPORTS SA is prohibited.
F
4
IMPORTANT:
E D
3
SEE DETAIL
FOX - DT ROLL FORK
2
See Detail B
B
1
Full mode
Information and data contained in this document is confidential and proprietary to SCOTT SPORTS SA.
Copying, using or disclosing such information and data without written permission of SCOTT SPORTS SA is prohibited.
F
DETAIL B
SCALE 2:1
Fork cable
E D
FOX - DT ROLL FORK
C
B
ROCK SHOX ROLL FO
Detail B
DETAIL B
SCALE 2:1
E D
Adress Part name
ROLL-FORKS
SCOTT SPORTS SA
Route du Crochet 17
1762 Givisiez
SWITZERLAND
Version: 01
Division Pro-E file
BIKE cable-adapter.prt
C
scott-sports.com
B
Adr
SC
Ro
176
SW
Div
DETAIL A
SCALE 2:1
Project
T
Weight
-
Scale
1:1
Drawn by
VL
B
13