Scott Spark Owner's Manual
Hide thumbs
Also See for Spark:
- Manual (14 pages) ,
- Owner's manual (11 pages) ,
- Owner's manual (21 pages)
Related Manuals for Scott Spark
Summary of Contents for Scott Spark
- Page 1 Spark SCOTT 2013 BIKE OWNERS MANUAL SCOTT SPORTS SA | 17 RTE DU CROCHET | 1762 GIVISIEZ | SWITZERLAND © 2011 SCOTT SPORTS SA, ALL RIGHTS RESERVED | SCOTT-SPORTS.COM...
-
Page 2: Table Of Contents
Set-Up Spark with Scott Nude 2 TC Shock ....... . . -
Page 3: Spark Concept
SPARK CONCEPT GEOMETRY SPARK 26" AND 29" The new Spark is the result of 2 years of research and development for one of the lightest mountain bike frame set available on the market, hitting the scale at below 1800 grams (4 lbs) including the frame, Scott Nude 2 shock and the unique TWINLOC remote control. - Page 4 TECHNICAL DATA SPARK 26" TECHNICAL DATA SPARK 29" Travel 120/85/0mm Travel 100/70/0mm Suspension Ratio Suspension Ratio 2.63 Piston stroke 50mm Piston stroke 38mm Shock length (Eye to Eye) 190mm Shock length (Eye to Eye) 165mm Hardware Mainframe 22,2mm x 6mm...
-
Page 5: Tc Shock Technology/Twinloc Levers
TWINLOC allows also the remote control of the front fork to shift between lock-out 60% (approx. 85/70mm) the characteristic of the air and open mode at the same time when you change the modes on the Scott rear shox. spring gets harder. This results in climbing without “bobbing”... - Page 6 FOX-DT ROLL FORK Weight General tol. Format fixation hole FIXATION HOLE also on the fork with an blue colored roll with a “DNA3” logo on the roll with Scott ROLL-FORKS ROLL-FORKS S SA Rock Shox Roll fork SCOTT SPORTS SA...
-
Page 7: Assembly Of The Remote Cable
SCOTT SPORTS SA Information and data contained in this document is confidential and proprietary to SCOTT SPORTS SA. Route du Crochet 17 Copying, using or disclosing such information and data without written permission of SCOTT SPORTS SA is prohibited. Scale Material... -
Page 8: Nude 2 Shock And Twinloc Remote Control Lever
L2 Release Button S7 Cable Fixing Screw (hidden behind remote wheel) L3 Remote Control Cables S8 Shock Piston L4 Cable Tension Screw Fork Remote S9 SAG Indicator (o-ring on piston) L5 Cable Tension Screw Shock Remote BIKE OWNERS MANUAL scott-sports.com... -
Page 9: Basic Set-Up Of The Twinloc Remote Control
Tighten the cable and fix the cablefixing screw (S7) by turning it On Spark Carbon frames you will find an internal cable routing. clockwise with a 2mm allen key and Push the inner cable first through the remote lever in the upper cable routing of the a max. -
Page 10: Set-Up With Nude 2 Shock
For all adjustments of the air spring the remote lever has to be in position “all travel” RECOMMENDED TOOLS FOR THE SHOCK SET-UP To adjust the air pressure of the air chamber of the Scott Nude 2 Shock please refer to the following instruction: 1. - Page 11 - If it does not bounce the rebound is too slow. Turn the knob 1-2 “clicks” counter clockwise. In case you want even more detailed figures of air pressure or tuning hints, you can download a program under www.scott-sports.com in the support area of the website BIKE OWNERS MANUAL scott-sports.com...
-
Page 12: Set-Up Of Other Shock Models
Spark bike, as we designed both parts for a perfect matching combination Same for the DT M210 and X-Fusion E1 shock on some of the Spark models. with a linear suspension rate. -
Page 13: Headset Options
1. A tapered headset and fork steerer system to match with semi-integrated headsets of the “50-61”mm range with ID of Headtube of 44.0mm on top and 54.9mm on the lower end. All alloy front frames of Spark have a BB shell for 73mm BSA standard. Ritchey WCS Carbon Zero Tapered PF 50-61mm... - Page 14 ADJUSTABLE BB HEIGHTT FRONT DERAILLEUR (FD) MOUNTING DETAILS On Spark bikes equipped with the Nude 2 TC shock you can adjust the BB height On all Spark frames you will find a Shimano E-type front derailleur but fixed directly above ground in 2 positions by flipping a geometry chip located on the linkage bar on the swingarm without the plate that is fixed normally between the bottom bracket shock mount.
-
Page 15: Spark Cable Routing
3mm allen key and a tightening torque of 4Nm/35in/lbs The carbon frames of Spark have an internal shifting cable routing with cable stops on the front end of the downtube as shown in the drawing below. - Page 16 Please make sure to respect the 40mm distance between the cables and the BB (bottom bracket) housing to avoid “ghost-shifting” and/or damages on the shift cables and brake hoses. The cable guide can be ordered via the Scott distribution with parts number: 223305 BB Cableguide Spark 2012 carbon BIKE OWNERS MANUAL scott-sports.com...
- Page 17 Please make sure to respect the 40mm distance between the cables and the BB (bottom bracket) housing to avoid “ghost-shifting” and/or damages on the shift cables and brake hoses. The cable guide can be ordered via the Scott distribution with parts number: 223305 BB Cableguide Spark 2012 BIKE OWNERS MANUAL scott-sports.com...
-
Page 18: Adjustment Of Seatpost-Height
REPLACEABLE DROPOUT On Spark bikes of model year 2012 you can replace the rear derailleur hanger. Depending on the different models you’ll find following options: The replaceable hanger is available via the Scott distribution with parts number 206473. -
Page 19: Rear Disc Brake Mount
For the set up of the front fork please use the fork specific manual attached to the bike. The rear disc brake on Spark is Postmount (PM) Standard on the left seatstay and it is possible to use disc rotors with 160, 180 and 185mm diameter. -
Page 20: Warranty
5 years for the frame shall be reduced to 3 years. Costs for maintenance and service have to be born by the owner of the SCOTT bike. Shock Nr................