Related Manuals for Scott SCALE CARBON
Summary of Contents for Scott SCALE CARBON
- Page 1 SCOTT 2011 SCALE CARBON BIKE OWNERS MANUAL SCOTT SPORTS SA | 17 RTE DU CROCHET | 1762 GIVISIEZ | SWITZERLAND © 2009 SCOTT SPORTS SA, ALL RIGHTS RESERVED | SCOTT-SPORTS.COM...
-
Page 2: Table Of Contents
P. 006 BB Standards/ FD Mounting Details P. 006 Chainguide P. 008 The Scale Carbon bikes should be adjusted exactly to the current rider for reaching maximum safety and fun while Headset Options P. 009 riding. All adjustments should be done at the local Scott dealer BB Cable Guide/Cable Routing P. -
Page 3: Scale Carbon Concept
Scale is the result of research and development based on the feedback of the Scott- Swisspower Racing Team searching for one of the lightest cross country racing frames in the market. Scott’s focus was not only on lightweight but also on a stiff and easy to handle racing frame. Size... -
Page 4: Technical Data Scale
Important for PressFit Cartridges (PF). Please respect the torque given by Shimano/ Sram A higher tightening torque might cause damage to the FD clamp and/or frame tube! PF BB 92 has a housing width of 89.5mm with an inner diameter for the cartridges of 41mm. The Front Derailleur (FD) clamp is with an inner diameter of 34.9mm, the cable routing on the frame is for “down route/pull - down swing” models. 2011 SCOTT BIKE OWNERS MANUAL... -
Page 5: Chainguide
CHAINGUIDE HEADSET OPTIONS On some Scale Carbon models you will find a chainguide system to support the Scale Carbon features a tapered headset and fork steerer system to match with shifting performance when using 2 chainring cranksets. semi-integrated headsets of the “50-61”mm range. -
Page 6: Bb Cable Guide/Cable Routing
2. Push the inner cables from the front downward inside the downtube to the BB housing. Please make sure to follow the cable routing as shown below: A special BB Cable Guide was developed for Scale Carbon which is available as a spare part at the Scott distribution. -
Page 7: Seattube Clamp
REPLACEABLE REAR DERAILLEUR HANGER Scale Carbon features two different versions of the seatpost fixation on the seattube. Scale Carbon is using the same replaceable rear derailleur hanger as Scott Spark and Genius. This spare part can be ordered via the Scott distribution with article number 206473. -
Page 8: Rear Disc Brake Mount
FRONT FORK SET-UP/ CHANGE OF FRONT FORK: The rear disc brake on Scale Carbon is Postmount (PM) Standard on the left chainstay and optimized for 160mm/6” rotors, so the calliper can be mounted directly without For the set up of the front fork please use the fork specific manual attached to the bike. -
Page 9: Warranty
5 years for the frame shall be reduced to 3 years. Costs for maintenance and service have to be born by the owner of the SCOTT bike. On Gambler, Voltage Fr and Volt-X the warranty period is limited to 2 years.