Adjustment • IMPORTANT This manual refers to all 2018 SCOTT Scale carbon bikes and GUARANTEE ON SCOTT BIKES frames, for all other bikes and frames please refer to the correct manual or your authorised SCOTT dealer. For SCOTT Scale 700 plus please contact your local SCOTT...
• IMPORTANT brand. Ensure the tire clearance is tools, like FEA software, to map out the carbon lay-up. Thanks to SCOTT's proprietary adequate when replacing your tires! Only a bottle with 0.55L capacity will EvoLap-Technology, different forces can be applied on a virtual model and the frame have the clearance to fit a small frame construction is adjusted accordingly.
BASIC SET-UP OF FORKS • IMPORTANT! SCOTT Scale 3 is designed around the BOOST platform so many of the fitted parts: cranks/ Recommended tools for the shock setup: wheels/dropouts/forks differ from traditional cycle parts. Always consult your authorized The SAG tool that came with your bike. *Fox forks only...
• REBOUND FORK SET-UP Your SCOTT bike will be supplied with a SAG tool to help set up your bikes suspension, these “Rebound” describes the speed the fork returns back SAG tools can be easily clipped on the fork body and Fork dust seal.
If your dropout needs to be replaced, we recommend this work should be carried out by your local SCOTT dealer as the rear derailleur may need adjustment, failure to adjust this correctly may result in accident or damage to your bike.
• BB STANDARDS/FD MOUNTING DETAILS The SCOTT Scale has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this is a press fit system and special tools are required for removal and refitting, please contact your SCOTT dealer for assistance.
Component failure To make a claim under this limited warranty, you must notify SCOTT of the claimed defect can lead to loss of control of the bicycle and result in serious personal injury.