6.7.7 Camera Title
Here is for you to modify channel name.
The revised channel names will be displayed on the screen.
The default setting of the channel name is Channel No.1 to Channel No.16. See
Figure 6-45.
Please note when you modify channel name in DVR end, this modification not
applies to web end or standalone end, you need to use this interface to refresh.
6.7.8 Upgrade BIOS
Click upgrade BIOS button, the interface is shown as below. See Figure 6-46.
Open the BIOS file (You can get from our local engineer or download from our web
service) and then click send BIOS button.
During the upgrade process, there is a process bar for your reference.
6.7.9 Reboot
Click reboot button, system pops up a warning dialogue box to alert you. See
Figure 6-47.
6.7.10 About
Here is for you to view basic system information. See Figure 6-48.
Figure 6-44
Figure 6-45
Figure 6-46
Figure 6-47
93