Table of Contents
Advertisement
6.6.2 General
Click general button, the interface is shown as below. See Figure 6-23.
Here you can select file length, and choose overwrite the previous file or stop
recording when disk is full.
You can select channel number, protocol, address and baud rate to control the lens
or PTZ.
6.6.3 Schedule
Click schedule button, the interface is shown as in Figure 6-24.
Here you can draw a √ before Sunday to Saturday. And then set various time
periods (from 0 to 24 o'clock).
You can draw a √ to enable record type: record/motion/alarm.
Figure 6-22
Figure 6-23
83
Advertisement
Table of Contents
