Table of Contents
Advertisement
Record Stop Snapshoot
6.4.6 PTZ Control
Please click the corresponding direction arrow to adjust zoom, focus and iris. See
Figure 6-8.
Note: before you operate this function, please make sure you have properly set PTZ
protocol (Main menu->Setting->Pan-tilt Zoom).
Click parameter button in Figure 6-8. The interface is shown as below. See Figure
6-9.
Here is for you to control direction operation. There are eight levels ranging from 1 to
8. Level 8 is the fastest speed.
In Figure 6-9, click PTZ set button. You can see the following dialogue box. See
Figure 6-10. You can select in the dropdown list.
Figure 6-7
SIT is 3D positioning button. Around
SIT are eight PTZ directions keys.
Left key: zoom in. Right key: zoom out
bright.
Figure 6-8
Figure 6-9
Full-screen
Close
Left key: zoom out. Right key: zoom
in.
Left key: turn dark. Right key: turn
77
Advertisement
Table of Contents
