Activate Pattern Function; Border Setup; Activate Border Function; Dome Menu Control - Videovox Pro DVR User Manual

Figure 5-9

5.2.6 Activate Pattern Function

In Figure 5-6 input mode value in the No. blank, and click pattern button.

5.2.7 Border Setup

In Figure 5-5, click border button. The interface is shown as in Figure 5-10.
Please go to Figure 5-2, use direction arrows to select camera left limit, and then
please go to Figure 5-10 and click left limit button
Repeat the above procedures to set right limit.
Figure 5-10

5.2.8 Activate Border Function

In Figure 5-6, click auto scan button, the system begins auto scan. Correspondingly,
the auto scan button changes to stop button.
Click stop button to terminate scan operation.

Dome Menu Control

5.3
In Figure 5-6, click page switch button, the interface is shows as below. See Figure
5-11
Click menu to enter dome menu. The direction arrows here are to control dome
menu.
Click page switch button, system goes back to Figure 5-2.
Figure 5-11
73