Table of Contents
Advertisement
4.5.3 Video Loss
In Figure 3-14, select video loss in the Type item. You can see the interface is
shown as in Figure 3-17.This function allows you to be informed when video loss
phenomenon occurred. You can enable alarm output channel and then enable
show message function.
Channel: select the channel you want to enable lens shading alarm.
Type: please select video loss.
Record channel: select the channel to record when video loss occurred.
Alarm output: activate peripheral alarm device when video loss occurred.
Enable tour: Here is for you to activate tour between different cameras.
Latch: when motion detection completes, system auto delays detecting for a
specified time. The value ranges from 10-300(Unit: second)
Figure 3-14
Figure 3-15
Figure 3-16
41
Advertisement
Table of Contents
