5.2.1 Preset Setup
Note: The following setups are usually operated in the Figure 5-2, Figure 5-5 and
Figure 5-6.
In Figure 5-2, use eight direction arrows to adjust camera to the proper position.
In Figure 5-5, click preset button and input preset number. The interface is shown as
in Figure 5-7.
Add this preset to one patrol number
5.2.2 Activate Preset
In Figure 5-6 please input preset number in the No. blank, and click preset button.
5.2.3 Patrol Setup
In Figure 5-5, click patrol button. The interface is shown as in Figure 5-8.
Input preset number and then add this preset to one patrol.
5.2.4 Activate Patrol
In Figure 5-6, input patrol number in the No. blank and click patrol button
5.2.5 Pattern Setup
In Figure 5-5, click pattern button and then click begin button. The interface shows
like Figure 5-9.
Please go to Figure 5-2 to modify zoom, focus, and iris. Go back to Figure 5-9 and
click end button.
You can memorize all these setups as pattern 1.
Figure 5-7
Figure 5-8
72