Table of Contents
Advertisement
4.3.6 Alarm
Please refer to chapter 4.6 Alarm Setup and Activation.
4.3.7 Detect
Please refer to chapter 4.5 Detect.
4.3.8 Pan/Tilt/Zoom
The pan/tilt/zoom setup includes the following items. Please select channel first. See
Figure 4-14.
Protocol: select corresponding PTZ protocol such as DH-SD1.
Address: input corresponding PTZ address.
Baud rate: select baud rate.
Data bit: select data bit.
Stop bit: select stop bit.
Parity: there are three choices: none/odd/even.
After all the setups please click save button, system goes back to the previous menu.
For detailed setup, please refer to chapter 4.9 Preset/Patrol/Pattern/Scan.
4.3.9 Display
Figure 4-13
Figure 4-14
60
Advertisement
Table of Contents
