Table of Contents
Advertisement
3.9 Preset/ Patrol/Pattern/Scan
In Figure 3-25, click the "set" button. The interface is shown as below. See Figure
3-28.
Here you can set the following items:
Preset
Patrol(Tour)
Pattern
Border
In Figure 3-25, click page switch button, the interface is shown as in Figure 3-29.
Here you can activate the following functions:
Preset
Patrol(Tour)
Pattern
Aux on
Aux off
Auto scan
Auto pan
Light on
Note: The following setups are usually operated in the Figure 3-25,Figure 3-28 and
Figure 3-29 .
4.9.1Preset Setup
In Figure 3-25, use eight direction arrows to adjust camera to the proper position.
In Figure 3-28, click preset button and input preset number. The interface is shown
as in Figure 3-30.
Now you can add this preset to one patrol (tour).
Figure 3-28
Figure 3-29
48
Advertisement
Table of Contents
