Connecting Video Output - Videovox Pro DVR User Manual

Figure 2-1

2.6.2 Connecting Video Output

This section provides information about physically connecting video display devices
to the DVR. See Figure 2-2.
If you connect the DVR with a TV monitor or VGA monitor, the DVR can automatically
detects the monitor type. And without any output device, by default, the DVR is
configured to use a TV monitor. In this case, if your application requires a VGA
monitor, you have to press the button "Fn" or Shift on the front panel to switch.
NOTE:
Video output 1 and VGA can't display at the same time. But Video output 2 can
display properly with Video Output 1 or VGA.
Figure 2-2
24