Symmetricom ND-CLK User Manual page 33

Enter the Number or Alpha Letter corresponding to the command desired and press the
enter key. Current configuration or default answers are displayed in brackets.
Depressing the 'Enter key only' will retain the current entry/default.
Get Status Info
Select this menu option to query the device for parameters relating to the clock's
current status. This includes information regarding the clocks reference to UTC,
local time, displayed time, whether it is synchronized, and its NTP server.
Set Device Name
To set the device name, select this menu option. Enter the desired device name.
Set/Reset Password
To set, change or remove the password, enter '3' for this option. Bear in mind that a
lost/forgotten password cannot be recovered.
[Note: the factory default password is: "public"]
[Hint: To remove password protection for a clock, select the Set Password
command. You will be prompted to enter the old password. Enter the old password.
Do not enter anything into the New Password or Confirm Password fields. Click OK
to save. Upon you next session, you will not be prompted for a password for the
clock.]
Set IP Configuration
To set the IP Configuration, select this menu option. NOTE: If you select this option,
you will be disconnected from the session upon completion, whether you actually
change any entries or not. You have the choice of using DHCP for automatic IP
Configuration or entering the data in these screens for Static IP addressing. By factory
default, the clock is set to DHCP address mode.
ND-CLK User Manual- Rev 1.0.1 - Sep-08
30
®
Symmetricom , Inc