Symmetricom ND-CLK User Manual page 18

Properties
The network configuration may be viewed in a summary form under the
Properties selection.
Network Settings
The network settings must be established for the clock to operate on the network. You
must be a network administrator or have their support to complete these functions. Your
network administrator determines the information for the Network Settings.
[Note: The default factory setting for network configuration is to use DHCP/BOOTP.]
[Note: If a DHCP server cannot be found on the network by the NTP clock, the IP
address will be assigned a fallback IP address of 169.254.xxx.xxx]
To utilize static IP addressing, de-select the checkbox for "Automatically obtain network
configuration from DHCP/BOOTP". You must enter the IP address, Netmask, Gateway,
Primary DNS, and may enter a Secondary DNS.
ND-CLK User Manual- Rev 1.0.1 - Sep-08
15
®
Symmetricom , Inc