Symmetricom ND-CLK User Manual page 27

Select the OK button to accept the new settings.
The new hand alignment settings will be stored in non-volatile flash. The clock hands
will adjust to the new settings and will continue displaying the time after several
moments.
[Note: it is suggested to double check the new settings with the digital display reference
at this point to ensure that the hands have been correctly set]
Set Password
The third option on the clock configuration pull down menu allows you to set a
password for each individual device. The password must be entered twice to
confirm the entry. The password is a maximum of 11 characters and a minimum of 1
character, and is case-sensitive. Click the OK button to save the password or cancel
to discard the change.
Warning: If the password is lost, the user must reset the clock using the Reset
button on the rear of the clock. This will cause the clock to return all
configuration to factory-default settings.
24
®
ND-CLK User Manual- Rev 1.0.1 - Sep-08 Symmetricom , Inc