Grizzly G4791 Owner's Manual page 18

7.
8.
9.
Note: It may be necessary to slightly re-
position the cabinets and chip pan during this
step.
Figure 9.
10.
11.
Note: Re-check the bedway for levelness
after the first 24 hours, the first two weeks,
then annually after that.
Figure 9
Mounting to Shop
Floor
Bolting to Concrete Floors
Figure 10
Figure 10
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.