Grizzly G4791 Owner's Manual page 17

Placement &
Assembly
The Model G4791 is a
heavy machine. Serious
personal injury may occur
if safe moving methods
are not used. To be safe,
get assistance and use
power equipment rated
for at least 2000 lbs. to
move the shipping crate
and remove the machine
from the crate.
To move and assemble your mill/lathe:
1.
Figure 7
Note: Leave the screws slightly loose for
adjusting the center panel in a later step.
Figure 7.
2.
Note: Do not mount the cabinet stands to the
floor for now so that they can be aligned with
the chip pan and machine in the following
steps.
3.
4.
5.
6.
Note: Place a piece of 2 x 4 between the
right lifting strap and the leadscrew to prevent
the leadscrew from bending, as shown in
Figure 8.
Figure 8.
Figure 8